Properly positioning your Harmony Hub or Blaster

Most Harmony remotes control your devices using infrared (IR) signals, meaning that there must be a direct line of sight between the Harmony remote, Harmony Hub or Blaster, and your device's IR receiver.

Pointing your remote

When you start an Activity such as Watch TV, Harmony sends a series of commands to power on and change your devices' input. You must point the remote directly at your devices for the full time it takes to start or stop an Activity. Harmony remotes with screens will display "Starting Activity" during this time and may take 60 seconds or more depending on your devices.

  • Make sure there aren't any obstacles between the remote and your hub, mini blasters or other devices.
  • If a device isn't powering on or switching inputs correctly, you may fix your Activity.

Harmony - blocked IR signal

Harmony Hub & mini-blasters

Hub in another room?

If your hub is located in another room, we recommend assiging your TV to be controlled by your Harmony remote and not your Harmony hub. For more information, see: Assign your device to an IR mini-blaster port

Assigning the TV to the remote for hub-based models is ideal if the TV is located in another room away from the rest of the devices only otherwise its not recommended because you have to make sure you keep the remote pointed if assigned to the remote.

  • Place the hub in the largest open cabinet space.
  • Place an IR mini blaster next to your television.
  • If you have a second IR mini blaster, place it on a separate shelf.
  • IR signals will bounce off of cabinet doors and walls, but will not pass through them.




Note:

You may need to re-adjust the placement of the hub and/or IR mini blasters to find the optimal position for proper device control.


Harmony - positioning the hub

Additional notes:

  • The Harmony Smart Control remote and Harmony Smart Keyboard don't control devices directly, but communicates with the Harmony Hub using radio frequency (RF) that then relays the command to your devices using IR. The remote does not require a direct line of sight with your devices, nor with the hub.
  • By default, the Harmony Ultimate remote doesn't control devices directly, but communicates with the Harmony Hub using radio frequency (RF) that then relays the command to your devices using IR. In this configuration, the remote does not require a direct line of sight with your devices, nor with the hub.
  • Some devices are controlled using Bluetooth wireless technology, radio frequency (RF) or Wi‑Fi and do not require direct line of sight with the remote, Harmony Hub or IR mini blasters. To learn more about these particular devices, visit our support article: Connecting Harmony Smart Keyboard to entertainment devices.

Harmony Express Blaster

  1. Place your blaster in an open space next to or underneath your TV.
  2. Place an IR mini blaster next to other devices, that use IR so that they can be controlled as well.
  3. IR signals will bounce off of cabinet doors and walls, but will not pass through them.
  4. Placement only needs to be considered for devices that are controlled via IR, devices controlled via Wi‑Fi and/or Bluetooth does not rely on your Blaster's placement.
Harmony Blaster positioning
Notice

You may need to re-adjust the placement of the blaster and/or IR mini blaster to find the optimal position for proper device control based on your home entertainment setup.

Additional notes:

  • The Harmony Express remote doesn't control devices directly, but communicates with the blaster using radio frequency (RF) that then relays the command to your devices using IR, Wi-Fi or BT. The remote does not require a direct line of sight with your devices, nor with the blaster.
Elite Home Control Home Hub Hub Smart Keyboard Link One Smart Control Companion Touch Ultimate Ultimate Home Ultimate Hub Ultimate One 950 Pro 200/300/350 600/650/665/700

Select your remote

We need to know which type of remote you have in order to provide you the correct instructions. Please select from one of the options below in order to get started.


 
Harmony Hub‑based Remote My remote uses Harmony Hub
 
650
Harmony IR Remote  (no hub) My remote doesn't use a hub

Incompatible Remote

Instructions on this page are not relevant for the Harmony remote you've selected.

GO BACK

Harmony Helper

send
Do you need help finding anything?