Controlling devices independently

Harmony allows you to control each device directly and independently. We recommend not changing the input/source or power on/off states using this method as it may cause your devices to come out of sync.

Tip:

If you find yourself using device mode often, then we recommend you assign the commands you use most often to your Activity mode.

Harmony remote

You may enter device only mode on Harmony 600/650/700 by pressing the Devices button in the lower center of the screen as shown in the picture on the left, then select the device you want to control. For touchscreen remotes, press the DEVICES button underneath the touchscreen display, as shown in the picture on the right. To exit device only mode, press the Activities button on 600/650/700 remotes, or the ACTIVITIES button for touchscreen remotes.

Device mode

Harmony app

On the Harmony app press the Devices tab to switch between screens. Exit device mode by selecting the Activities tab which is located directly to the left of the Devices tab.

Harmony Express app

  1. Launch the Harmony Express app and tap the Device Settings.
  2. Select the device you'd like to control and select Device Commands.
    • You will be presented with commands that you're able to send.
Home Control Home Hub Hub Smart Keyboard Link One Smart Control Companion Touch Ultimate Ultimate Home Ultimate Hub Ultimate One Elite 950 Pro 600/650/665/700

Select your remote

We need to know which type of remote you have in order to provide you the correct instructions. Please select from one of the options below in order to get started.


 
Harmony Hub-based Remote My remote uses Harmony Hub
 
650
Harmony IR Remote (no hub) My remote doesn't use a hub

Incompatible Remote

Instructions on this page are not relevant for the Harmony remote you've selected.

GO BACK

Harmony Helper

send
Do you need help finding anything?